SPC flooring, renowned for its waterproof, wear-resistant, and low-maintenance properties, requires no complex cleaning procedures. However, employing scientific methods is essential to prolong its lifespan. Follow a three-step approach: ‘Daily Maintenance – Stain Removal – Specialized Cleaning,’ while avoiding common pitfalls:
Routine Basic Cleaning: Simple Maintenance to Prevent Dust and Grime Accumulation
1. Daily Dusting
Use a dry soft-bristle broom, flat mop, or vacuum cleaner to remove surface dust and hair. Pay particular attention to dust-prone areas like corners and beneath furniture to prevent scratches from dust friction.
2. Periodic damp mopping
Every 1-2 weeks, wipe with a well-wrung damp mop. A neutral cleaner may be used. After gentle wiping, dry residual moisture with a dry cloth to prevent water seeping into the locking joints (though SPC is water-resistant, prolonged water accumulation may compromise joint stability).
Common Stain Treatment: Targeted Cleaning to Avoid Damage
Different stains require specific methods, adhering to the core principles of ‘prompt action + no corrosive agents’:
1.Drinks (coffee, juice): Immediately blot liquid with paper towels, then wipe with a damp cloth dipped in a small amount of neutral detergent. Finish by drying with a clean cloth.
2.Grease (cooking oil, sauces): Dilute neutral washing-up liquid in warm water. Dampen a cloth, wring thoroughly, and gently dab the affected area repeatedly. Avoid using steel wool or hard brushes to scrub.
3.Stubborn stains (ink, lipstick): Dampen a soft cloth with a small amount of alcohol (under 75% concentration) or a specialised floor stain remover. Gently wipe the area, then clean with clear water and dry thoroughly.
4.Adhesive residues (tape residue, glue): Gently scrape off surface adhesive layers using a plastic scraper (avoid metal scrapers). Remove any remaining residue with an eraser or a cloth dampened with a small amount of white vinegar.
Special Cleaning Situations: Handling Accidents and Protecting Flooring
1. Water Spills/Moisture
Should water be accidentally spilled or puddles remain after mopping, immediately blot dry with a dry mop or paper towels. Pay particular attention to joint seams to prevent prolonged dampness causing warping or mould growth on locking mechanisms (SPC core is waterproof, but locking mechanisms are often resin-based and may deteriorate with prolonged exposure to water).
2. Scratches/Abrasions
Fill minor scratches with a colour-matched floor repair crayon before wiping clean. For deeper scratches not penetrating the wear layer, consult the brand’s after-sales service regarding specialised repair agents. Avoid sanding with abrasive paper (which may damage the surface wear layer).
3. Heavy Stains (Nail Polish, Paint)
While still wet, dab a small amount of acetone onto a tissue and gently blot the affected area (only for small, localised stains). Once dried, do not scrape forcefully. Use a specialised paint remover (select a ‘non-corrosive formula for hard flooring’), apply as directed, leave for 1-2 minutes, then wipe away with a soft cloth. Finally, rinse any residue with clean water.
Cleaning Misconceptions: Avoid these practices to prevent floor damage
1.Prohibit corrosive cleaners: Avoid oxalic acid, hydrochloric acid, or strong alkaline cleaners (toilet bowl cleaners, heavy-duty kitchen grease removers, etc.), as these damage the wear layer and surface finish, causing discolouration or whitening.
2. Avoid direct contact with high temperatures: Never place hot kettles, pans, electric heaters, or other high-temperature items directly on the floor. Always use heat-resistant mats to prevent surface melting or warping.
3. Do not use abrasive tools: Steel wool pads, stiff brushes, or sharp scrapers can scratch the wear layer, compromising the floor’s protection and making it susceptible to staining.
4. Avoid prolonged soaking: Even though SPC flooring is water-resistant, avoid rinsing with large volumes of water or prolonged immersion (such as leaving a soaked mop directly on the floor), to prevent moisture expansion of the locking joints.
By adhering to the principles of ‘gentle wiping, preventing accumulation, and avoiding corrosion’, the cleaning and maintenance of SPC flooring becomes remarkably straightforward. This approach preserves its surface lustre while maximising its durability, making it ideal for long-term use in both domestic and commercial settings.
Contact info@gkbmgroup.com for further details on SPC flooring.
Post time: Oct-06-2025
